Feniex Cannon A/W OPEN BAG

This is a total game changer. The Feniex Cannon hideaway from Feniex is the first in the industry to be designed to replace the factory bulb and fit in the factory tail light or turn signal housing using the factory opening. With the Cannon, you may find yourself getting carried away because the options are amazing. Consider the following examples:

Install the Cannon in your reverse lights. Connect mode one to your lighting controller to activate the warning mode and alternate between white on one side of the vehicle and color on the other side, and vise versa. Then connect mode 2 to the factory reverse lights circuit to activate only the white LED's for use as backup lights. No more drilling holes with standard bonnet based bulbs!!

Download Instruction Manual	Download Wiring Manual
Download Flash Pattern Sheet

• flatter design to lend itself more towards the surface mount platform.
• 12 LED's
• LEDs are CREE LEDs not the Phillips LEDs
• LEDs will be placed in a circular format around the lighthead
• Will have dual color models
• dual color leds will be interwoven in the circle instead of one side in one color and one side in another color (i.e. red,blue,red,blue,red,blue,red,blue,red,blue,etc)
• will have dual mode capability meaning two positive inputs so they can be used with a brake light/turn signal AND warning mode
• this will allow you to move use a dual color (white/red) as a fog light on steady burn white for mode 1, but switch to warning mode in mode 2. Mode 2
• will always take priority over mode 1. You are not limited as what you will use as mode 1 or mode 2
• will have a brake mode that will quickly flash three times then steady burn (much like ambulances, fire trucks, and motorcycles)
• Cannon can be placed in the existing hole for the factory light bulb so you don't have to drill a hole
• not plug in play with every manufacturer, however, it will work with some (1'' diameter)
• Cannon is only meant to be a replacement for a single filament bulb.
• May introduce a three mode feature to serve as a replacement for the dual filament bulbs in the next few months (ETA 2nd quarter release)
• Brake mode will always over ride any function
• Can order inline resister to dim a function of the Cannon
• Will have capability control individual colors
• These leds are run at 2.5 watt (about half power) to extend life of the unit
• can add a plug between the driver and the light head for an additional cost
• the driver is more robust with a larger heat synch to help protect the internal electronics in high temperature environments (engine compartments)
• the LEDs have 120 degrees of disbursement
• the delay for the flasher is 100 milliseconds so it CAN be used with an external flasher